Weapon target check intervals

Jip

The targets are computed in the engine. We only have the parameters and the output that we can work with in Lua. Anything else requires assembly patches.

KaletheQuick

Would it be possible to enforce some limit on target priorities? Like t1 can have 2 priorities, then some "ALLUNITS" catchall, t2 4, t3 6, exp 8? And enforce it so ATP mods don't interfere?

Or would batching or target sharing be possible? Like one unit of a type can just 'give' its target to a nearby unit of the same type? Or I guess a unit searching for a target asks nearby allies of the same type for their target, checks if it's in range/valid, and then if not proceeds with a whole target check?

Jip

Would it be possible to enforce some limit on target priorities? Like t1 can have 2 priorities, then some "ALLUNITS" catchall, t2 4, t3 6, exp 8? And enforce it so ATP mods don't interfere?

That is what I'd like to have - yes. Perhaps not that extreme, anywhere between 4 to 6 is fine. But 10+ is a bit much. The balance team isn't quite in favor yet.

Or would batching or target sharing be possible? Like one unit of a type can just 'give' its target to a nearby unit of the same type? Or I guess a unit searching for a target asks nearby allies of the same type for their target, checks if it's in range/valid, and then if not proceeds with a whole target check?

I'm afraid that finding nearby units is a similar query to finding nearby targets .

Jip

I've given this some thought and I think we can have a good compromise.

We can make a distinction between the 'primary' purpose of the unit and all the 'secondary' things that a unit can do too.

As an example, take the T2 UEF Transport. The primary purpose of the transport is to transport units. It is accompanied by two air to ground guns and two air to air guns with the following statistics:

-- air to ground

-- damage related
Damage = 3,
RateOfFire = 3,

-- performance related
TargetCheckInterval = 0.3,
AlwaysRecheckTarget = true
TargetPriorities = {
    '(ALLUNITS - SPECIALLOWPRI)',
},

-- air to air

-- damage related
Damage = 12,
RateOfFire = 1,

-- performance related
TargetCheckInterval = 0.5,
TargetPriorities = {
    '(ALLUNITS - SPECIALLOWPRI)',
},

We can all agree that the weapons are not impressive. We can also all agree that nobody would ever use a t2 transport for anything beyond transporting units. These weapons primarily exist for aesthetics.

Similarly, we can identify that:

The weapons of scouts (with the Selen as exception) are secondary to the purpose of the scout
The anti air weapons of frigates are secondary to the purpose of a frigate
The anti air weapons of destroyers are secondary to the purpose of a destroyer
The direct fire weapons of cruisers are secondary to the purpose of a cruiser
The anti air weapons of any tech 3 naval vessel (with the air carriers as exception) are secondary to their purpose
The anti air weapons on the average gunship / bomber (with the restorer as an exception) are secondary to their purpose
The anti air weapons of the average ground experimental is secondary to their purpose

And we can find some more candidates by looking individual units.

Performance

With that we define the 'primary' weapons to be the weapons that the unit is supposed to be using, and all other weapons are 'secondary' to give the game a more aesthetical feeling.

We can immediately see the impact on a reasonable scenario. Take 100 frigates in formation with 300 hostile ASF patrolling in the center of the formation.

Current situation, game is running at about 10 - 12 ms / tick, with a sudden jump to 25 - 28 ms / tick about every second

With the suggested changes of the next chapter, game is steadily running somewhere between 8 to 10 ms / tick and there's no sudden jump

Changes

With all of that said, I'm suggesting the following changes for primary / secondary weapons:

Primary weapons

TargetCheckInterval = math.max((0.5 * (1.0 / RateOfFire)), 0.5)
AlwaysRecheckTarget = true
TargetPriorities = { something between 4 to 6 elements }

This means that primary weapons can respond to change, they can have decent target priorities and their check interval is reasonably fast in comparison to their attack speed.

One exception: the primary weapons of an experimental unit are allowed to have a lower target check interval and have additional target priorities.

Secondary weapons

TargetCheckInterval = math.max((1.0 * (1.0 / RateOfFire)), 1.0)
AlwaysRecheckTarget = false
TargetPriorities = { ALLUNITS }

This means that the secondary weapons are unable to respond to change, have a lower target check interval and they make no distinction between valid targets.

What is next

Unless I've been persuaded of anything else I will push this through into the game in about two weeks. Therefore use this topic to discuss this - what are the pros and cons? Is it worth the performance? Should we do this or not?

I also highly recommend everyone to replicate the scenario used in the performance section. You can view the sim time (ms / tick) by opening the console (using ~ hotkey) and then typing ren_ShowNetworkStats. If it suddenly closes, type an e first and then remove it again.

maudlin27

@jip While I agree in principle with the idea of having simple checks for a secondary weapon where that weapon's effect is negligible, I'd disagree with making it as broad as 'if it's not the primary purpose then downgrade it'.

As an example, you mention cruisers with direct fire weapons. Sometimes I will build a Cybran cruiser for the primary purpose of using its direct fire weapon, since on some maps it's the optimal unit for taking out a firebase (although having said that I dont actually know what its default priorities are so maybe it wouldnt make much difference).

Seraphim sub hunters would be another example where you might build them both for the AA and for the anti-sub capabilities.

Other examples where you might build a unit for a combination of its weapons/non-primary purpose would be restorers, and in theory continentals (although in practice they're a bit too weak to use efficiently as a combat unit that can also sometimes transport units)

I'd therefore suggest a stricter threshold, where the weapon must both be a secondary purpose, and also be very bad at that secondary purpose. So for example a fatboy's anti-air or a transport's air to ground would fall into that category, but a Seraphim sub hunter's AA or a Cybran cruiser's direct fire attack wouldnt.

Jip

As an example, you mention cruisers with direct fire weapons. Sometimes I will build a Cybran cruiser for the primary purpose of using its direct fire weapon, since on some maps it's the optimal unit for taking out a firebase (although having said that I dont actually know what its default priorities are so maybe it wouldnt make much difference).

This is an example where I would not consider their direct fire a 'secondary' weapon. They actually do decent damage, they can actually take out a unit. I was thinking of the UEF / Aeon cruisers when writing this

Seraphim sub hunters would be another example where you might build them both for the AA and for the anti-sub capabilities.

Another example where it is not a 'secondary' weapon in the sense that it can actually take out a torpedo bomber.

I'd therefore suggest a stricter threshold, where the weapon must both be a secondary purpose, and also be very bad at that secondary purpose.

I agree - you phrased it better than I did.

snoog

Everything here sounds pretty good to me. I personally hate when units decide to change targets themselves and leave a unit nearly dead. Unfortunate we hit another limit of not having engine access though. That said, good job working with what you have access to Jip.

Jip

@snagglefox said in Weapon target check intervals:

Everything here sounds pretty good to me. I personally hate when units decide to change targets themselves and leave a unit nearly dead. Unfortunate we hit another limit of not having engine access though. That said, good job working with what you have access to Jip.

Me too - I'd prefer them to just fire away. But that is something to discuss with the balance team.

Unknow

This post is deleted!

Unknow

@jip Is it available on faf dev branch?

Jip

No - it is not.

edit: i'll make a small sim mod in this case, to allow you to reproduce the results of the performance test.

edit: here it is

You can find the unit in the cheat menu:

No other unit is adjusted. The unit in question also doesn't die properly. This mod is purely for making the performance comparison .

Make sure to match the situation:

And restart when testing for different units.

The scenario in question:

100 frigates in formation
300 asf patrol in the center of the frigates (that are in formation)
look at sim time by using the console command ren_ShowNetworkStats

Make sure to do a full restart of the map to prevent lingering units / wrecks from impacting the results.

Brannou

I'm wondering how does the advanced targeting mod impact the sim and with the retargeting intervals?

It's not part the game but it's used quite often

Jip

@brannou said in Weapon target check intervals:

I'm wondering how does the advanced targeting mod impact the sim and with the retargeting intervals?

It's not part the game but it's used quite often

Some of them are quite simple, others are terrible.

priorityTables = {
    ACU = "{categories.COMMAND}",
    Power = "{categories.ENERGYPRODUCTION * categories.STRUCTURE}",
    PD = "{categories.DEFENSE * categories.DIRECTFIRE * categories.STRUCTURE}",
    Units = "{categories.MOBILE - categories.COMMAND - categories.EXPERIMENTAL - categories.ENGINEER}",
    Shields = "{categories.SHIELD}",
    EXP = "{categories.EXPERIMENTAL}",
    Engies = "{categories.ENGINEER * categories.RECLAIMABLE}",
    Arty = "{categories.ARTILLERY}",
    Fighters = "{categories.AIR * categories.ANTIAIR - categories.EXPERIMENTAL}",
    SMD = "{categories.TECH3 * categories.STRUCTURE * categories.ANTIMISSILE}",
    Gunship = "{categories.AIR * categories.GROUNDATTACK}",
    Mex = "{categories.MASSEXTRACTION}",
    Snipe = "{categories.COMMAND, categories.STRATEGIC, categories.ANTIMISSILE * categories.TECH3, "..
        "categories.MASSEXTRACTION * categories.STRUCTURE * categories.TECH3, categories.MASSEXTRACTION * categories.STRUCTURE * categories.TECH2, "..
        "categories.ENERGYPRODUCTION * categories.STRUCTURE * categories.TECH3, categories.ENERGYPRODUCTION * categories.STRUCTURE * categories.TECH2, ".. 
        "categories.MASSFABRICATION * categories.STRUCTURE, categories.SHIELD,}",
    Naval = "{categories.MOBILE * categories.NAVAL * categories.TECH3, categories.MOBILE * categories.NAVAL * categories.TECH2, categories.MOBILE * categories.NAVAL * categories.TECH1}",
    Bships = "{categories.BATTLESHIP}",
    Destros = "{categories.DESTROYER}",
    Cruiser = "{categories.CRUISER}",
    SACU = "{categories.SUBCOMMANDER}",
    Factory = "{categories.TECH3 * categories.STRUCTURE * categories.FACTORY, categories.TECH2 * categories.STRUCTURE * categories.FACTORY, categories.TECH1 * categories.STRUCTURE * categories.FACTORY}",
},

As an example, the Snipe version is terrible. But a lot of them are quite simple, and in general better for performance. It influences the TargetPriorities property, it doesn't influence anything else.

Turinturambar

transport anti ground weapons are for ghettos gunships and therefore have an important role

Jip

I'm not suggesting to remove them. Just to make them less responsive and significantly cheaper on the simulation.

Blade_Walker

I think for all anti-air as a secondary, you want to at least include HIGHPRIO, and then all other units in the priorities.

Otherwise you will have, say destros or battleships simply dying to scouted mercies...

If Advanced Target Priorities is still available, and would act to immediately override the defaults and prompts a target check when it is selected, then I don't see a downside to making this change for rank and file units, bring on the uber simspeed !

Jip

High priority is not used by mercys. See also this list:

https://pastebin.com/fZ7Mcrep

It is commonly used for campaign related units and the CZAR .

Otherwise you will have, say destros or battleships simply dying to scouted mercies...

I'd say this is fine if you choose to send in units with no proper air support. Any additional proper AA would prioritize the mercies and take them out. But we could, I suppose, have AA prioritize bombers / gunships and then everything else . That is still quite simple and low on simulation costs.

If Advanced Target Priorities is still available

That remains available, just like Snipe mode will remain.

Blade_Walker

@jip said in Weapon target check intervals:

High priority is not used by mercys. See also this list:

https://pastebin.com/fZ7Mcrep

It is commonly used for campaign related units and the CZAR .

Otherwise you will have, say destros or battleships simply dying to scouted mercies...

No I mean mercies have 'HIGHPRIAIR' as one of their unit categories, not shared by any others AFAIK, and unit anti-air, even minor, has this as first priority, and mercies with their 10 hps are straight countered by it, as long as they are not just blips.

I'd say this is fine if you choose to send in units with no proper air support. Any additional proper AA would prioritize the mercies and take them out. But we could, I suppose, have AA prioritize bombers / gunships and then everything else . That is still quite simple and low on simulation costs.

I'd say this would be a rather large balance change so I would definitely want this added to all the secondary AA at least, over bombers or gunships

Jip

@black_wriggler said in Weapon target check intervals:

I'd say this would be a rather large balance change so I would definitely want this added to all the secondary AA at least, over bombers or gunships

Don't worry, that is what the balance team is for to make a compromise with .

arma473

Is there a way to override the normal weapon behavior for ASF fights, like if the system detects more than 100 ASF fighting more than 100 ASF, instead of using the normal process of checking for targets and tracking each projectile individually, the system just simulates the weapons firing.

For example, if you're in a situation where this mode is turned on: pick a "Team B" ASF that is close to multiple Team A ASF that are ready to shoot (not necessarily in range, but let's say within 150% of the Team A's range). Then figure out how many shots it would take to kill that ASF. For n shots, pick n of Team A's ASFs that are ready to shoot and unload their weapon (so they have to reload before they can fire). And kill the selected ASF from Team B. Following this process would make ASF fights MUCH faster.

To avoid unfairness to the other team (if 1 team gets to shoot first) perhaps run this at the same time for both sides. So even if an ASF is selected for death, it still gets to make a simulated shot at enemy ASF.

So all ASF would essentially be on hold fire, and every so many ticks (maybe every 3 ticks) you count how many ASF for both sides are ready to shoot, and use that to kill an appropriate number of ASF from the other side. I anticipate that this would be MUCH faster than tracking every projectile individually. If the ASFs don't even fire a weapon animation, it wouldn't look so good, but it would be super fast.