Redesign of all HQ and support factories

Jip

@Saver from my point of view some of these units can definitely still use a touch. But it was such a sensitive topic (out of the blue) a few years ago that it's been untouched since. Could you share what you have made so far?

Saver

@Jip Hi Jip, I've only reworked the UEF land factory so far. HQ and Support now have their own construction animation. However, I had to adjust the models a bit. I will provide you with a mod via Discord. If it does not work, I can also upload it to FAF. it is already functional.

Saver

Saver

Hello everyone, as already mentioned, I'm going to revisit the topic of "Redesign of all HQ and support factories" and try to create the missing animations and adjust some designs.

Since this topic originated with the FAF team (please correct me if I'm wrong),
from now on it will be more of a free contribution from me. I'll try to pay attention to suggestions and welcome suggestions. However, please note that I will approach this topic freely and independently in my decision.

There will therefore be no interventions in the core game on my part, unless the FAF team approaches me.

Now to the project: Due to technical reasons, I've unfortunately only been able to complete the UEF land and Air factory. Since I want to save this work, I'll upload a mod to FAF with the work so far.

A big thank you goes to Balthazar. He provided me with new textures for the land factory. For me personally it looks great.

Thanks also to Jip and CDRMV, who pointed out errors in the models.

Please excuse my poor English.

Saver

Here are the current status pictures if you don't want to test the mod:

UEF Land:

Saver

UEF Air:
Here is also a good example when the textures were not improved, like in the land factories.

Saver

I'd like to visit all the factories, but for now, that's my current work status.

Blackrobe

@Saver
Nice work mate; but you've hooked the T1 Air Factory at 4800 Health. It should be 4000. Seems odd that you go from a T1 Air factory at 4800, to upgrade to a T2 Air factory that is 4000 health.

Saver

@Blackrobe Thanks for the tip. I forgot to use the new Unit BP files from FAF when I was adapting. Because I'm also using standard models from Supreme Commander: Forged Alliance. They still have the old numbers from the standard game. I'll correct that today

Saver

Hi everyone, the final part of the UEF factories is complete. All factories have now received mesh and animation adjustments in all variants. Since I have to replace my hardware next week, it will take me a little longer to get the other factories working. At least all systems should be running stable again by then ^^ But it's at least a start Here are a few pictures for comparison.

The changes to the models should be not very noticeable, so just a few minor comments. The flashing lights have been corrected in all factories, and T3 HQ has received another turret.
But that's it for now. I'll let you know if there's any further progress. Mod: Savers Factory Rework

Saver

Hello everyone,

I've completed the transition to new hardware and have been able to continue working on the project.

In the next step, I want to focus on the other factions. First, I reread the forum post about the Aeon Water Factory to use the criticisms mentioned as a starting point for improvements. Like the team before me, I probably won't be able to do justice to everyone. But here, Chonaml, is my first attempt.

Here are some pictures for the current comparison between HQ and Support Factory T3 Water.

If you have any opinions, criticisms, or suggestions, please remain objective. I'll be happy to respond or implement them.
See you soon.

Saver

A quick question for the FAF team. Is it possible to make the Mercury Pool from Class: T3 a bit smaller?

It's already quite large. At least the length could be reduced a bit. If you'd like, I can edit it and make it available to you.

Aircraft Carrier UAS0303

Omen Class: T3 Battleship UAS0302

Torrent Class: T3 Missile Ship XAS0306

Here is the corresponding script area.

StartBeingBuiltEffects = function(self, builder, layer)
    ASeaUnit.StartBeingBuiltEffects(self, builder, layer)
	self.MercuryPool = import("/lua/EffectUtilitiesAeon.lua").CreateMercuryPoolOnBone(self, self.Army, '*Unitbone*', 2.5,4,4, 0.1)
end,

The "Unitbone" would have to be changed to the appropriate name and the numbers at the end and that would be fine.

I just noticed it while experimenting. I might add it to the end of the water factories as a unit adjustment.

Nomander

@Saver said in Redesign of all HQ and support factories:

Is it possible to make the Mercury Pool from Class: T3 a bit smaller?

Unless the unit script does something special, the blueprint Physics MeshExtents fields should adjust the size of the mercury pool.

Saver

@Nomander Hi, thanks for the tip. I'll take a look at it once I've finished the water factory If I have enough time this evening, I might be able to upload the first version to FAF (European time )

Saver

Good evening,

Here's an update on the current status.

FAF all

Mod all

FAF T3

Mod T3

FAF T2 T1

Mod T2 T1

FAF

Mod

FAF all

Mod all

Since I don't want to make any major changes to the existing models (that would be beside the point for the project), I still hope to meet some of your requirements. Unfortunately, the animations are still missing, as my new version of Blender is still causing some problems, and I might have to upgrade again. I hope to finish all the animations by Friday, then I'll upload a new version of the mod to FAF. But that's it for now. See you soon

Saver

Hello,

I've finished the animation. Currently, I'm still missing the adjustments to the blinking lights and the LOD1 models. However, I've uploaded a new version (No. 6) with the current status to FAF. I hope you like the models.

BlackYps

Nice work you are doing here! I'll have to check out your mod to take an even closer look in the game

Saver

@BlackYps Thank you very much, that's nice to hear

Saver

Final (I think ^^) The Aeon Water Factory should now be complete and is available for anyone who wants to test it in the

mod - Savers Factory Rework.

If I missed any mistakes, please let me know But that's it for today.

Adjustment of the flashing lights completed.

Adjustment of the LOD 1 models so that you can roughly recognize the new models even from a distance.

Have a nice evening

Saver

Hello everyone,
I had to correct this report again. I found a bug that I unfortunately only discovered in test mode. It concerns the construction area when a factory is supposed to be placed. Unfortunately, it's not that easy to fix because I haven't been able to determine the exact cause yet. Therefore, I can only report where I noticed the bug.

Unfortunately, this bug affects FAF, my modified version. I've tried to reduce the problem. Here are some examples of the problem.

In the left area, you can see T1 factories. In the right area, you can see all the Tec levels. All factories were created using cheats.

The first error area is with the T3 factories. Either the area has expanded or the unit is extending beyond it.

Now I wanted to see what would happen when the T1 factories upgraded. The overlap would begin.

But you'd think that's only the case in cheat mode. Unfortunately not. I've had five T1 factories built here and had them upgraded. I'll also point out errors in the T2 status here, as these could be overlooked.

Another example where I first had factories built.

As I said, I unfortunately couldn't fix this error. So here are the similar images with the same tests.

As I said, I tried to solve or minimize the problem. With more or less success

When factories are built one after the other, it seems fine. However, if I place a T1 factory next to it and let it upgrade, the same thing happens again.

Hopefully, more experienced people here have an idea. I'll leave it as it is for now, since it only concerns the Aeon Water Factory, and I'll take another look at it later.

As a guide, I tried to resolve the issue. Here are the steps. The new water models all come from a single base factory, so the bone layout is the same for all of them. So I looked for the error in the blueprint and tweaked the following values:

In my mod, I was at least able to limit the error to T2, which was resolved after upgrading to T3.

I hope we can fix this bug later, but for now, I want to focus on the Aeon Land factory. Let's see what we can do there. ^^ See you soon