Did you know?

Looking at the db it seems you are right, though I thought all torp bombers did avoid torp defense.

@ftxcommando Well yes you're right, before the change to normalize torp bombers seraphim and I think uef torps got screwed by torp defense and aeon and cybran (uses current behavior) weren't effected by it. I may be mixing up the factions.

Did you know?

Transports assisting a land factory will automatically carry units to the factory's rally point

DYK: An engineer with an attack move order will move to reclaim nearby enemy structures even if they were never scouted.

13

•When you build something, game remembers that and does not let you build in that place anymore.
(for example you could use cheats to teleport building away, but as long as building is not dead, game will not let you build in that place)
•When you upgraide any building, old building gets removed and replaced with new upgraided building. And while this happens, game forgets that that old 1rst building was build. New building that was spawned on top does not get the same treatment as newly build one and there is no extra mechanism to prevent building
•Usually players can't order to build buildings on existing buildings, but AIs can, sometimes they block their upgraided factories by placing stuff inside factories.eb840326-d21a-46c4-9013-eb32cb06fda7-image.png
Players can use "repair" hotkey on a building's wreck to give order, even if wreck is on top of other building. however it should not interfere with model of that building... not sure how that works, but you can't just build things inside other thing, but there is lots of empty space around factories where you can build
•you can do some cool weird stuff with that
IT WAS ALL DONE WITHOUT CHEATS, i didn't teleport things inside other things, i actually build it this way, and it can be reapeated with cheats off.
7d2f68b6-41cb-4045-a743-9cdcefadc0c1-image.png
3bbc2a06-8a20-4e7f-94a7-61729b25350e-image.png
bd3ab2c7-e7bc-4e88-9828-fc24b20bcb3b-image.png
•That is only the beginning tho!
I found out that it is often not consistent.
Sometimes i can fit storage in the corner of the factory, and sometimes i don't
386385f1-03a3-4ac8-bed5-46ad207f67cd-image.png
6709b5c9-d2d4-40ab-8f0c-807788d55af4-image.png
However if all factores are placed next to each other in a grid - then they all are acting similar, in a way that you can build storage in the same corner (i just didn't build all of them on this creenshot, but only 2 storages on the left are buildable for those factories)
b7252460-ecfc-405b-980e-f74f2545c541-image.png

•So i have been testing that for long time but im gonna skip all the failed test attempts... here is test that reavealed the mistery
•Making a big grid of dead t1 AAs
9c61c9f6-263a-4ead-aa76-2d0fedbb5ffb-image.png
•1rst test susbject coordinates 0x0 (mesured in pds with 0 at the top left pd xD), 2 layer of pds are buildable on the left, 1 layer at the bottom
d5f64ec9-9b78-4208-9121-a22d06a12b8c-image.png

•second subj, coords 0x1, 2 layers at the left, 1 layer at the bottom but only partually... weird actually
f67521bd-868b-45f9-b676-5b2652ded4a2-image.png

•3rd, 0x2, now it gets different, and i am able to build on top 75490332-b927-4850-8003-a377f241d625-image.png

•4th, 0x3. weird that those two pds were not buildable now 3bef4ca5-adf6-46b7-a25a-589646737d51-image.png

•5th. 1x0. so changin horisontal position changed my ability to rebuild PDs on factory sides nowa4ee36db-844b-40ec-82ce-d3fac976ad55-image.png

After that it was clear that factory's position on invisible grid affects your ability to rebuild things inside of it, witch was kinda werid...
also it repeats itself at least once in avery factory lenght i think... didn't check that for sure, and didn't check if it repeats itself more often... maybe like every 2 1 pgens or so maybe possible.

not many uses for that i guess, can probably try to fit storages and factories next to mexes, but need to know beforehand if you can do that with certain mexes or not. The fact that id depends on position kinda makes things simpler. also makes things insanely more fun for people that would try to recreate what you are doing but not placing things exactly in the same place LOL.

maybe you could fit more shields in the same area and fit tele-defence in the same area at the same time but it requires you to build things and then ctrl+k them and then build on top of them without reclaiming and then upgraide what you have build and then rebuild from wrecks.. not easy, and not cheap9b66a951-2fe1-45b3-9589-bea740f25939-image.png

Edit: Testing was hard not only for me https://youtu.be/NhIr38iKFac that poor SACU lost its mind

TA4Life: "At the very least we are not slaves to the UI" | http://www.youtube.com/user/dimatularus | http://www.twitch.tv/zlo_rd

ZLO, it's time your write a damn book about all the knowledge you have accumulated on this game 📚

If you assist unfinished building or unit of your opponent with a builder, builder will try to capture it. even if progress bar fills, capturing will not actually happen, and it will keep trying to capture it over and over again.

You can assist engineer with mantis or harbringer and they will assist in capturing if there is nothing to aggro against nearby

mantis / harb will not assist ally engineer capturing, but engineers can assists ally engineers capturing

If you and your opponent queue same building in the same place at the same time you can help to build enemy building.
it can often happen with engineers trying to build mass extractor at the same time... but surely happened once to two acus standing in the open place and randomly deciding that it is a good time to start a PD right in the same place and at the same time https://youtu.be/VsJ3Syb8wW4?t=134

TA4Life: "At the very least we are not slaves to the UI" | http://www.youtube.com/user/dimatularus | http://www.twitch.tv/zlo_rd

Holy smokes that's a lot of cool weirdness right there! Do facs get the adjacency bonus from pgens built like this?

Dyk : aeon torpedo bomber depth charges gives water vision. You can use that to spot stealth ACU under water by groundfiring.

Dyk: Capture speed is proportional to build time of a unit and it takes twice less time to capture unit, compared to building it.
capturing will drain twice is much power per second compared to you building the thing that you capture.
So overall it takes half the time and same amount of power to capture unit compared to building it.

Reclaim speed of LIVING UNITS (not wrecks) is only proportional to power cost of a unit and nothing else.
Just divide power cost by builder's build power and divide by 10 and you will get time that it takes to reclaim something.
E.G. t1 engineer costs 260 power.
if you want to reclaim it with other t1 engineer, it wil take 260 / (5*10) = 5,2 second.
reclaiming t1 interceptor with t1 engineer will take 45 seconds.
reclaiming t2 mex with t1 engineer will take 108 seconds
and 13 minutes and 20 seconds to reclaim an ASF with t1 engineer

it takes 3.2 sec to reclaim aeon lab
2.8 for cybran
2.4 for UEF
1.6 for selen
however 1rst 0.2 second engineer spends to unpack his "arm" and aim(tested on uef enginner)
then after all HP has expired it actually needs extra 0.1 second to actually kill the unit. If that does not happen, unit will be alive with 0 HP

one fullly upgraided t3 hive will deal 219 DPS to a GC by reclaiming it
20 Fully upgraided hives can capture a monkeylord for about 9.2 seconds

TA4Life: "At the very least we are not slaves to the UI" | http://www.youtube.com/user/dimatularus | http://www.twitch.tv/zlo_rd

Dyk : Groundfiring SR will kill and vet from inte swarm attacking it. On the countrary, If you give only move orders to the inte, they will win against the SR.

Did you know ?
The fervor (Aeon T1 arty) is a reliable anti-air unit, and an underated counter to mercy. 😮
mercy.png

@auricocorico I knew I saw that correctly when I was casting that game!

Did you know that you can get full t2 beach mex by min 7:10 and then need pricisely 31 T1 pgens to spend every single point of mass for t2 destroyer production.

From what i know ALL units can only shoot KINDA in sync with game ticks.
I mean that game engine can only wait whole amount of ticks between shots, no fractional amount of ticks possible.
For example t1 PD (according to blueprint) shoots 3 times a second, 50 damage per shot
with some easy calculations we get 3 * 50 = 150 DPS...
If you look in unit DB now you will see that it sais 166 DPS. But it only was "fixed" in databasy relatively recently.
The thing is that if you want to shoot 3 times per second you would need to shoot every 0.333333s

and i honestly have no idea how this actually works but in my mind i imagine engine reading blueprint and calculating
"i need to wait 0.33333 after that shot, okay waiting 0.3 seconds" and it does that after every shot
afaik it is not rounding, fractional part of the number just get trown away, cause that what computers do.
can check that if you look at a pillar, pillar is supposed to wait 1.25 second between every shot, but THATS ILLIGAL for engine and it just trows away numbers that are to small for him to comprehend, and pillar is shooting every 1.2 seconds

TA4Life: "At the very least we are not slaves to the UI" | http://www.youtube.com/user/dimatularus | http://www.twitch.tv/zlo_rd

Did you know:

Tech3 Sonar Buildings are moveable except for Seraphim.
(Seraphim has no Tech3 Sonar, but a movable Tech2 Sonar Building)

Yes i do

So there is intresting channel. I might get u an intresting info too!

Fecundation in the birth canal of a female rabbit lasts for 10-12 hours after mating!

DONT BELIVE BH HE IS LIEING

Let's keep the "did you know" around FAF facts .... Unless you want me to ruin the thread with physics and maths facts 👨‍🏫

Aeon TMD projectiles (those spheres that they shoot up) also divert mercy shots, however TMD will not launch it's sphere when it sees mercy shot so you need your opponent to launch missiles at you while also trying to mercy you 😄

TA4Life: "At the very least we are not slaves to the UI" | http://www.youtube.com/user/dimatularus | http://www.twitch.tv/zlo_rd